UC500

From JohnWiki

UCE - http://10.1.10.1/admin/Common/HomePage.do

Log into UCE CLI: service-module integrated-Service-Engine 0/0 session

John 201 blast1 501 (this is where all voice mail goes). User John (with normal VM pass) has rights to edit mailbox from phone; can't figure out web.

Now shared 200 mailbox. How do I re-set up mail notification? Can log into UCE above using "john" who has rights to general delivery mailboxes. Can access them from TUI. Not sure how to set up mail notification.

Email - UCE above, Voice Mail -> Call Handling -> Message Notification -> Subscriber Notification Management - Select Shared mailbox - Notification tab

Backlighting

http://uc500.com/en/how-configure-backlight-behavior-cisco-7965-7970-and-other-backlit-ip-phones

UC520(config)#ephone-template 16 UC520(config-ephone-template)#service phone daysDisplayNotActive 1,2,3,4,5,6,7 UC520(config-ephone-template)# service phone backlightOnDuration 00:01 UC520(config-ephone-template)#service phone backlightIdleTimeout 00:01 UC520(config-ephone-template)#exit UC520(config)#tel UC520(config)#telephony-service UC520(config-telephony)#cnf-file perphone UC520(config-telephony)#exit UC520(config)#ephn UC520(config)#ephon UC520(config)#ephone 4 UC520(config-ephone)#reset resetting 001F.9EAC.0C56

Nope, didn't change:

UC520(config-telephony)#create cnf-files Creating CNF files UC520(config-telephony)#reset-all

                            ^

% Invalid input detected at '^' marker.

UC520(config-telephony)#reset all Reset 4 phones: at 15 second interval - this could take several minutes per phone Starting with 7960 phones

To Do

- Transfer main line.

- KG still has it "hacked".

- set up AES on AP: [23:10] <DrHim> but put aes in anyway [23:10] <DrHim> fucking drunk; gotta go pack car for 2 hour trip at 6am, dammit [23:13] <KidGloves> make sure aes-ccm is first then tkip [23:13] <KidGloves> may be your prob [23:13] <KidGloves> on the iphone you have to specify that it's wpa2 [23:13] <KidGloves> so tell it to 'forget' the network, then let it rediscove.r

- Debug alerting on 501

- Set 608 for 7 digit dialing

- DID incoming question

- Set AA, set 16082845237 in the PSTN field; all works.

- Nuke AA, set DID to point 16082845237 to 501 (blast group). Incoming fails: SIP/2.0 404 Not Found

- Seems like I need to set E.164 number on the 501 mailbox to be 16082845237 (I think I got this to work directly to a personal mailbox this way before), but I don't see any way to do this.

- Also works to get into VM if I set the number on Voicemail Access PSTN Number.

SIP debug (https://supportforums.cisco.com/docs/DOC-9824)

debug ccsip message debug voip ccapi inout debug voip dialpeer inout debug voice translation debug voice source-group debug voip rtp session named-events

TFTP debug

debug ip dhcp server events debug tftp events

Paging

[14:30] <KidGloves> ephone-dn 12 [14:30] <KidGloves> number 4999 [14:30] <KidGloves> name IP-Paging1 [14:30] <KidGloves> paging ip 239.1.1.1 port 2000 [14:30] <DrHim> ok [14:30] <KidGloves> so you have an ephone-dn for paging. you can either assign a button to that ephone-dn or just manually dial '4999' in my example. [14:30] <DrHim> okay coolio; thanks [14:30] <usurper> BEEE"GET ME MY BEER"EEEP [14:31] <KidGloves> then a phone config would look like this: [14:31] <KidGloves> ephone 18 [14:31] <KidGloves> device-security-mode none [14:31] <KidGloves> video [14:31] <KidGloves> mac-address 001B.D4A0.D809 [14:31] <KidGloves> ephone-template 16 [14:31] <KidGloves> speed-dial 1 4999 label "House Page" [14:31] <KidGloves> speed-dial 5 4000 label "Dad Office" [14:31] <KidGloves> paging-dn 12 [14:31] <KidGloves> type 7970 [14:31] <KidGloves> button 1:26 2:29